MOTOBILT THE HAMMER SERIES FRONT BUMPER SKID PLATE - BARE STEEL JT The X Factor Series adjustable

The X Factor Series adjustable lower control arms offer a total of 90 degrees of misalignment that eliminates the bind found in your JL’s factory lowers

The stock Gladiator frame is trimmed approximately 14-5/8” and the total savings in length is approx

000LBS of pulling capacity with fast line speeds under load

these wheels are equipped with a 6061-T6 aluminum beadlock ring

Color: Matte Black

MOTOBILT THE HAMMER SERIES FRONT BUMPER SKID PLATE - BARE STEEL JT The X Factor Series adjustableThe Hammer Skid plate is an add on option to The Hammer Jeep JK Front Bumper. Skid plate is laser cut from 3 16 inch P and O steel and formed on a press brake. To install the skid plate, you must trim approx. 1 inch off each side of the crash bar. If you remove the skid plate later, the part that you've trimmed will not be seen. Skid plate bolts on to The Hammer front bumper and requires no welding. Features: Laser cut from 3 16 inch P and O steel